您现在的位置:上海山合海融商贸有限公司---进口产品专页---西班牙LIFASA电容器、电抗器、控制器等产品

原FMD系列产品已升级换代为FML系列,国内常用的原FMD4050的替代型号为FML4460,本公司常备FML4460现货,欢迎有该产品需求的客户随时与我们联系。新产品增加60%使用寿命;同一产品适用于不同电压等级,为客户提供更多便利;产品尺寸与原来相同,便于用户替换原使用产品,重量比原来产品有大幅下降;产品颜色由原来的蓝色改变为灰白色(RAL7035),详细产品资料请点击这里浏览或来信来电咨询。点击下载产品样本

HAF ABSORPTION FILTER
Description
Harmonic absorption filters are used when it is necessary to reduce the harmonic voltage and current distortion in the supply system. Absorption filters are formed by capacitors connected in series with reactors, tuned to the frequency of the harmonic to be suppressed. Filters are assembled in metal cabinets and include contactors and high rupture capacity fuses for short circuit protection. Thermal protection of the filter is achieved by means of thermal sensors located in the core of the reactors.
Technical Characteristics
Tensión nominal/Rated voltages......230, 400, 415, 480 V
Frecuencia de red/ ............................50 Hz (60 Hz)
Network frequency
Sintonización filtros/Filter tuning .....5 o, 7o , 11o, 13o
Regulación/Regulation ...................... by current or by harmonics
Grado de protección/ ......................IP20
Degree of protection
Construcción/Construccion ................Armario metálico/Metal cabinet
Color armario/Cabinet colour ........Gris/Grey RAL 7035
Instalación/Installation...................... Indoor (floor mounting)
Normas/Standards ............................IEC 60831, IEC 60439, IEC 61642

Standard steps


50 Hz 400V

Absorption Filter tuning

Maximum harmonic current

QN (kvar)

Irms (A)

5o, 7o, 11o, 13o

40

20

50

5o, 7o, 11o, 13o

80

41

100

Harmonic Filters
These filters are used when the main objective is not the reactive power compensation at the fundamental frequency, but to reduce the harmonic distortion in the supply system.
Among the problems caused by harmonics and which may make their suppression necessary, are the following:
Interferences in telecommunications.
Distortion on the mains voltage.
Disturbances in electronic systems.
Erratic operation of control and protection relays .
Failures in transformers and motors, due to overheating caused by losses on the core.
Overheating of protective fuses to the point where a minor spike on the line causes them to blow.
It should be pointed out that the impedance of all the filters is capacitive below its tuning frequency, whereby they also contribute, even if in a small scale, to the reactive power compensation at the fundamental frequency.
Installation of filters produces a modification on the topology of the electrical supply system. For this reason, the design of filters must be done with regard to an accurate analysis and study of the whole system.
According to the application, there are different types of filters:
3rd harmonic filter HBF-T
Isolation filter
Absortion filter HAF
High pass filter HPF
Active filter SINAF 2.0

  • 电力电容器Power capacitors

  • 谐波滤波器Harmonic filters
  • 电容器柜Automatic Banks

  • 返回西班牙LIFASA电容器首页
  • 防护滤波器Protection filters
  • 无功功率控制器Reactive power controllers
  • 附件Accessories and auxiliary
  • 电机和照明电容器MOTOR AND LIGHTING CAPACITORS