EMERGENCY / UNIVERSAL WIRE CUTTER
• Designed to facilitate cutting hot wires in emergency
conditions
• Extended nose allows the user to easily capture the con-
ductor when using the cutter on long telescoping sticks
• Longer lever arm reduces pulling requirement on the rope
• Shear type cutter blade ensures a clean cut without distort-
ing the wire strands
• Cutting head is mounted on 12” fiberglass shaft with uni-
versal head
• Cuts wire up to and including 9/16” O.D.
• Double pulley action requires less cutting force than sin-
gle pulley cutters
• Note: O.D. includes insulation
• Note: Due to the pull required on the rope fall line, it is
recommended for 1/0 ACSR
• Can be used with Pruner Rope Insulator for additional
protection near high voltage lines
| CAT NO |
DESCRIPTION |
LBS |
| 4186 |
CUTTER WITH 25’ OF 1/4”
POLYPROPYLENE ROPE |
4.6 |
| 4187 |
SAME AS 4186 EXCEPT FURNISHED WITH
A 12” FIBERGLASS LINK INSTALLED |
4.8 |
| 4188 |
SAME AS 4186 EXCEPT FURNISHED WITH
A 34” FIBERGLASS LINK INSTALLED |
5.0 |
HAND OPERATED RATCHET CUTTERS
• Lightweight ratchet type cutters for cutting aluminum and
copper cables
• Two models available, one for soft wire (11-112) and one
for ACSR (11-014)
• Cutter jaws completely surround conductor, which elimi-
nates cutter blade distortion
• Release lever allows cutter jaws to be opened at any time
• Handles are plastic dipped for comfort and a non-slip grip
• Compact size allows cutter to be used under close working
conditions
• Overall length is 10 inches
• Note: 11-112 not designed for use on ACSR conductors
| CAT NO |
MAXIMUM CAPACITY BARE ALUMINUM WIRE |
MAXIMUM CAPACITY BARE COPPER WIRE |
LBS |
| 11-112 |
600 MCM |
600 MCM |
1.6 |
| |
|
|
|
